Home of the Scott Riles Adjustable Front Sight System
   

 

Scott Riles Products
22mm and 30mm
Adjustable Front Sight System
>> more

Palma


Available in Two Different Rifle Types

Palma (top photo) bolt action and HighBoy for AR space gun or Tube gun type match rifles.

Both sights are designed for cross course, mid and long-range target shooting with a 200 to 1200 yard range. >>more information

Order Now

New Product

Palma Extended Uppers for Spacegun


>>more

Left Extended additional 76 minutes - Middle Extended 78 minutes. Right Standare Height
The 3 new products are extended uppers for the 30 mm Palma Front Sight.

Each is progressively taller by roughly 78 to 80 minutes of adjustment.
 

The extension uppers are interchangeable with the standard Palma Base.

An accurate serration values allows easy recalculation of your new range elevations.
>>more information

HighBoy
AR space gun or Tube gun type match rifles

>>more

The HighBoy (like the Palma version above) is designed for cross course, mid and long-range target shooting with a 200 to 1200 yard range. >>more information

Order Now

NEW PRODUCT

Palma Dovetail Mount >>more


Top and Bottom Placement shown with Palma Upper Sight Mounted

The Palma Dovetail Mount will allow a shooter to use the Riles Palma upper assemblies with 18, 22 and 30mm accessory threads, on their domestic and European style smallbore/fullbore target rifles. >>more information

Order Now

NEW PRODUCT

Anschutz Dovetail Mount >>more


AnschutzTop Placement shown with Palma Upper Sight Mounted

The Anschutz Dovetail Mount will allow a shooter to use the Riles Design Palma upper assemblies with 18, 22 and 30 mm accessory threads, on their domestic and European style smallbore/fullbore target rifles. >>more information

Order Now

30mm
Front Shade

There are 2 different length shade

  • 0.5 inches long (left)
  • 1.25 inches long (right)

Order Now

30mm
Captive Lens Cell


Scott Riles Design now has a lens cell accessory for the 30 mm front sight. It is designed to be a removable lens cell for shooters that wish to remove, clean or change the diopter power of the lens. The threads are 1 ¼ - 28 UN external on one end and 1 ¼ - 28 UN internal on the other end. The lens is held in a fixed position with a cyanoacrylate adhesive in a precisely machined and anodized aluminum component. The lens now is not secured inside the sight tunnel by an o-ring and retaining ring as before. Indexing is no longer an issue, the cell locks up against a shoulder the same way every time in the same sight tube.

The diopter value of the lens is mechanically engraved on the outside diameter of the cell body.

The lens is the same Essilor CR39 Crizal lenses as previously provided.
Each cell does allow accessories to be daisy-chained in the front side of the cell; you can group other accessories together like shades and rain guards.

Order Now

30mm
Rain Guard

The Rain Guard will protect from rain getting on the surface of the optical lens.

Order Now

Nut Cracker

The Nut Crackers are tools to install and tighten the 30 mm adjustable irises in any 30 mm front sight. They come in 2 sizes, a Dash – 1 and a Dash – 2. The Dash – 1 is sized for holding the sight tunnel tube while using the Dash – 2 is sized to secure the lock ring/nut of the iris. You do not need to purchase both, the Dash – 2 will do the job in most all cases. Cost is $11.00 each plus shipping.

 

All aluminum sight hardware and accessory items, except for the 30 mm lenses and
commercial bolts and washers,are designed and fabricated by Scott Riles. No exceptions
.
Home - Products - Detailed Pricing - Ordering - Contact - Reference Info.
© Copyright Scott Riles. 2010