Stress-Relieved Frame
Heavy steel plate box-welded structure undergoes high-temperature annealing at 600°C to eliminate internal stress, ensuring zero frame deflection over decades.
Engineering Excellence
Precision CNC Fiber Laser Sheet Cutter (1.5kW - 6kW)
Marvel Industrial Solution manufactures industrial-grade single table fiber laser cutting machines designed for clean edge finishing, exceptional accuracy, and high operational reliability. Built on an annealed, stress-relieved steel gantry bed, our systems maintain tight positioning tolerances of ±0.03 mm even during continuous high-speed traverse.
Each unit incorporates world-class fiber laser sources (Raycus or IPG), intelligent autofocus cutting heads, and advanced FSCUT CNC systems. From thin gauge stainless steel to heavy mild steel plates, our single table cutting platforms deliver consistent edge quality with minimal kerf width and zero burr formation.
- High Mechanical Rigidity: Thermally stress-relieved gantry frame prevents structural deformation over years of heavy industrial duty.
- Tier-1 Component Standard: Fitted with Raytools/WSX autofocus heads, Yaskawa AC servo drives, and HIWIN guide rails for continuous precision.
- Export-Ready Compliance: CE & ISO9001 certified, pre-tested with complete utility schematics, foundation drawings, and export vacuum packaging.
Technical Data
Machine Platform Specifications & Working Envelopes
Select from standard working table formats including 3000x1500 mm (3015), 4000x2000 mm (4020), and 6000x2500 mm (6025) tailored to your factory sheet size.
| Parameter | Low Power Series (1.5kW - 2kW) | Medium Power Series (3kW - 6kW) |
|---|---|---|
| Available Laser Power | 1500W / 2000W | 3000W / 4000W / 6000W |
| Working Bed Area (X / Y) | 3000x1500mm / 4000x2000mm | 3000x1500mm / 4000x2000mm / 6000x2500mm |
| Laser Wavelength | 1064 nm Fiber | 1064 nm Fiber |
| X/Y Axis Positioning Accuracy | ±0.03 mm/m | ±0.03 mm/m |
| X/Y Axis Repeatability | ±0.02 mm/m | ±0.02 mm/m |
| Max. Simultaneous Traverse Speed | 80 m/min | 100 - 120 m/min |
| Cutting Head Type | Autofocus / Manual Focus | Smart Autofocus (Raytools / WSX) |
| CNC Controller & Software | FSCUT 2000 / Cypress CAM | FSCUT 2000C / 3000 / Nesting Engine |
| Servo Drive System | Yaskawa / Panasonic AC Servo | Yaskawa High-Inertia AC Servo |
| Guiderail & Gear System | HIWIN Rails / APEX Precision Rack | HIWIN High-Rigidity Rails / APEX Rack |
| Operating Voltage | 380V / 3 Phase / 50-60 Hz | 380V / 3 Phase / 50-60 Hz |
Cutting Thickness Guide
Material Capability & Assist Gas Performance
Maximum production quality cutting thickness guidelines for stainless steel, carbon steel, aluminium, brass, and copper across various laser power levels.
| Material Type | Assist Gas | 1.5 kW | 3.0 kW | 6.0 kW |
|---|---|---|---|---|
| Carbon / Mild Steel (MS) | Oxygen (O₂) | Up to 12 mm | Up to 20 mm | Up to 25 mm |
| Stainless Steel (SS) | Nitrogen (N₂) / High-Pressure Air | Up to 5 mm | Up to 10 mm | Up to 16 mm |
| Aluminium Alloy | Nitrogen (N₂) / Air | Up to 4 mm | Up to 8 mm | 12.0 kW (Optional) |
| Brass & Copper | Nitrogen (N₂) | Up to 3 mm | Up to 6 mm | Up to 10 mm |
Engineering Advantages
Built for High Precision and Low Operating Cost
Every structural and electrical component is chosen to maximize machine uptime and reduce cost per cut part.
Autofocus Laser Head
Intelligent height sensing automatically adjusts focal distance according to sheet distortion or thickness variations, maintaining optimal beam spot diameter.
Advanced CNC & Nesting
FSCUT system with integrated automatic nesting software minimizes raw material scrap, supports fly-cutting, corner cooling, and power-ramp cutting.
Z-Axis Collision Protection
Capacitive sensor technology instantly halts head motion if a tipped-up cut component is encountered, guarding optics against expensive collisions.
Zoned Dust Extraction
Sectional pneumatically controlled ducting opens exhaust dampers only underneath the active cutting head area, maximizing smoke removal efficiency.
Low Running Overhead
Fiber optics eliminate laser mirror alignment, gas refilling, and tube replacements, resulting in up to 70% lower operating costs compared to legacy CO2 lasers.
Application Scope
Industries Utilizing Single Table Laser Cutters
Engineered for high-mix medium-volume job shops and dedicated OEM component manufacturing lines.
- Precision Sheet Metal Job Fabrication
- Electrical Enclosures & Switchgear Cabinets
- Automotive Parts & Chassis Components
- Elevator & Escalator Metal Panels
- Commercial Kitchen Equipment Manufacturing
- HVAC Ducting & Ventilation Hardware
- Architectural Metal & Decorative Screens
- Agricultural Equipment & Heavy Machinery
Buyer Technical FAQs
Frequently Asked Questions
Common questions from international buyers regarding machine selection, maintenance, and shipping.
A 1.5kW-2kW system cleanly cuts up to 10mm carbon steel and 4mm stainless steel. A 3kW-4kW model processes up to 16mm carbon steel and 8mm stainless steel, while a 6kW configuration cuts up to 22mm carbon steel and 14mm stainless steel with dross-free edge quality.
Single table laser machines require up to 40% less floor space, involve lower capital costs, and have fewer moving mechanical parts. They are ideal for facilities with space constraints, custom job shops, and applications where continuous 24/7 pallet shuttling is not mandatory.
We build our machines using globally proven components: Raycus/IPG fiber laser power sources, Raytools autofocus cutting heads, FSCUT CNC controllers, Yaskawa AC servo drives, Schneider electrical components, and HIWIN high-precision linear guides.
All machines are coated with anti-rust oil, wrapped in multi-layer moisture-proof barrier film, vacuum sealed, and securely mounted onto heavy steel-skid wood crates certified for ISPM-15 ocean transport.